.. _graph-compression: ================= Graph compression ================= The compression pipeline is implemented on top of the `WebGraph framework `_. It takes an ORC Graph Dataset as an input, such as the ones found in the :ref:`Graph Dataset List `, and generates a compressed graph suitable for high intensity analyses on large servers. Running the compression pipeline ================================ Dependencies ------------ To compress a graph, you will need to install the ``swh.graph`` tool as well as a recent JRE, as described in the :ref:`swh-graph-quickstart` page. You will also need the zstd_ compression tool:: $ sudo apt install zstd .. _zstd: https://facebook.github.io/zstd/ Hardware Requirements --------------------- The compression pipeline is even more demanding than the graph server in terms of hardware requirements, especially RAM. Notably, the BFS compression step loads a graph compressed in random order in memory, which is usually more than a TiB for the full graph. While it is possible to do this step with a memory mapping, our experiments show that this could take a very long time (several months) on hard drives. The LLP compression step requires 13 bytes of RAM per node, which could amount to storing hundreds of gigabytes in RAM in addition to loading the graph itself. Some steps also involve sorting the entire set of edges and their labels, by using large on-disk buffer files, sometimes reaching the size of the input dataself itself. The machine we used to compress the entire graph (dataset version 2022-04-25) has the following hardware specs: - 2 TiB of RAM (DDR4 ECC 2400Mhz) - 64 vCPUs (Dual AMD EPYC 7302 16-Core) - 24 TiB of SSD (NVMe) The server we rented is from the `HGR-HCI-4 `_ series from OVH. Input dataset ------------- First, you need to retrieve a graph to compress, in ORC format. The :ref:`Graph Dataset List ` has a list of datasets made available by the Software Heritage archive, including "teaser" subdatasets which have a more manageable size and are thus very useful for prototyping with less hardware resources. The datasets can be retrieved from S3 or the annex, in a similar fashion to what is described in :ref:`swh-graph-retrieving-compressed`, by simply replacing "compressed" by "orc": .. code:: console (venv) $ mkdir -p 2021-03-23-popular-3k-python/orc (venv) $ cd 2021-03-23-popular-3k-python/ (venv) $ aws s3 cp --recursive s3://softwareheritage/graph/2021-03-23-popular-3k-python/orc/ orc Alternatively, any custom ORC dataset can be used as long as it respects :ref:`the schema ` of the Software Heritage Graph Dataset. **Note:** for testing purposes, a fake test dataset is available in the ``swh-graph`` repository, with just a few dozen nodes. The ORC tables are available in ``swh-graph/swh/graph/example_dataset/orc/``. Compression ----------- You can compress your dataset by using the ``swh graph compress`` command. It will run all the various steps of the pipeline in the right order. .. code:: console (venv) $ swh graph compress --input-dataset orc/ --outdir compressed/ [...] (venv) $ ls compressed/ graph.edges.count.txt graph.edges.stats.txt graph.graph graph.indegree graph-labelled.labeloffsets graph-labelled.labels [...] graph-transposed.obl graph-transposed.offsets graph-transposed.properties (The purpose of each of these files is detailed in the :ref:`swh-graph-java-api` page. For sufficiently large graphs, this command can take entire weeks. It is highly recommended to run it in a systemd service or in a tmux session. It is also possible to run single steps or step ranges from the CLI: .. code:: bash swh graph compress -i orc/ -o compressed/ --steps mph-bfs See ``swh graph compress --help`` for syntax and usage details. For some steps, Java will try to allocate terabytes of memory in sub-gigabyte segments, so you should increase the number of allowed allocations first: .. code:: bash sudo sysctl -w vm.max_map_count=1966080 .. _swh-graph-compression-steps: Compression steps ================= The compression pipeline consists of the following steps: .. figure:: images/compression_steps.png :align: center :alt: Compression steps :scale: 20% Compression steps Each of these steps is briefly described below. For more details see the original Software Heritage graph compression paper [SWHGraphCompression2020]_, as well as chapters 9 and 10 of Antoine Pietri's PhD thesis [PietriThesis2021]_. .. [SWHGraphCompression2020] | Paolo Boldi, Antoine Pietri, Sebastiano Vigna, Stefano Zacchiroli. | `Ultra-Large-Scale Repository Analysis via Graph Compression `_. | In proceedings of `SANER 2020 `_: The 27th IEEE International Conference on Software Analysis, Evolution and Reengineering. IEEE 2020. | Links: `preprint `_, `bibtex `_. .. [PietriThesis2021] | Antoine Pietri | `Organizing the graph of public software development for large-scale mining `_. | Doctoral dissertation. Inria, 2021. 1. EXTRACT_NODES ---------------- This step reads a graph dataset and extract all the unique node SWHIDs it contains, including the ones that are not stored as actual objects in the graph, but only *referred to* by the edges. Additionally, it extracts the set of all unique edge labels in the graph. **Rationale:** Because the graph can contain holes, loose objects and dangling objects, some nodes that are referred to as destinations in the edge relationships might not actually be stored in the graph itself. However, to compress the graph using a graph compressio library, it is necessary to have a list of *all* the nodes in the graph, including the ones that are simply referred to by the edges but not actually stored as concrete objects. This step reads the entire graph dataset, and uses ``sort -u`` to extract the set of all the unique nodes and unique labels that will be needed as an input for the compression process. It also write object count statistics in various files: - The set of nodes is written in ``graph.nodes.csv.zst``, as a zst-compressed sorted list of SWHIDs, one per line. - The set of edge labels is written in ``graph.labels.csv.zst``, as a zst-compressed sorted list of labels encoded in base64, one per line. - The number of unique nodes referred to in the graph is written in a text file, ``graph.nodes.count.txt`` - The number of unique edges referred to in the graph is written in a text file, ``graph.edges.count.txt`` - The number of unique edge labels is written in a text file, ``graph.labels.count.txt`` - Statistics on the number of nodes of each type are written in a text file, ``graph.nodes.stats.txt`` - Statistics on the number of edges of each type are written in a text file, ``graph.edges.stats.txt`` 2. MPH ------ As discussed in :ref:`swh-graph-java-basics`, a node in the Software Heritage :ref:`data model ` is identified by its SWHID (see :ref:`persistent identifiers `), but WebGraph internally uses integers to refer to node ids. To create a mapping between integer node IDs and SWHIDs, we use the `GOVMinimalPerfectHashFunction `_ class of the `Sux4J `_ library, which maps N keys to N consecutive integers. We run this function on the list of SWHIDs stored in the ``graph.nodes.csv.zst`` file generated in the previous step. This allows us to generate a bijection from the set of all the *n* SWHIDs in the graph to the set of integers :math:`[0, n - 1]`. The step produces a ``graph.mph`` file (MPH stands for *Minimal Perfect Hash-function*), containing a function which takes a SWHID (as a bytestring) and returns its associated node ID. 3. BV compress -------------- This is the first actual compression step, where we build a compressed version of the input graph dataset. We use a ScatteredArcsORCGraph to load the dataset (implementation inspired of the `ScatteredArcsASCIIGraph `_ class in WebGraph). This class wraps the ORC Graph dataset and exposes a *virtual* ImmutableGraph, whose nodes and edges can be iterated sequentially as if it was any other standard graph. To do so, it puts all the edges in batches and sorts them in an aggressively parallel fashion, then stores them as ``.bitstream`` files, and returns a `BatchGraph `_ created from these batches. Finally, it uses the ``BVGraph.store()`` method, which compresses the input graph as a `BVGraph `_, using the compression techniques described in the article *The WebGraph Framework I: Compression Techniques* cited above. The resulting BV graph is stored as a set of files: - ``graph-base.graph``: the compressed graph in the BV format - ``graph-base.offsets``: offsets values to read the bit stream graph file - ``graph-base.properties``: entries used to correctly decode graph and offset files 4. BFS ------ In [LLP]_, the paper authors empirically demonstrate that a high graph compression ratio can be achieved for the graph of the Web by ordering nodes such that vertices from the same host are close to each other. In Software Heritage, there is no notion of "host" that can be used to generate these compression-friendly orderings, because the identifiers are just uniformly random cryptographic hashes. However, we can generate these orderings by running algorithms to inform us on which nodes are close to each other. In this step, we run a BFS traversal on the entire graph to get a more compression-friendly ordering of nodes. We use the `BFS `_ class from the `LAW `_ library. The resulting ordering is stored in a ``graph-bfs.order`` file, which contains all the node IDs in the order of traversal. 5. PERMUTE_BFS -------------- Once the BFS order is computed, we permute the initial "base" graph using the this new ordering. The permutation uses the `Transform `_ class from WebGraph framework. The BFS-compressed graph is stored in the files ``graph-bfs.{graph,offsets,properties}``. 6. TRANSPOSE_BFS ---------------- We transpose the BFS-compressed graph, using the `Transform `_ class from WebGraph. This step is a prerequisite for LLP compression. 7. SIMPLIFY ----------- This step creates a loopless and symmetric version of the BFS-compressed graph, using the `Transform `_ class from WebGraph. This step is a prerequisite for LLP compression. 8. LLP ------ Better compression ratios can be achieved by the Layered Label Propagation (LLP) algorithm to reorder nodes. This algorithm is described in [LLP]_. The LLP algorithm finds locality-preserving orders by clustering together nodes in close proximity. Similar to the BFS, this algorithm is particularly interesting for our use case as it is unsupervised, and does not rely on prior information on the clusters present in the graph. The idea behind the clustering algorithm is to randomly distribute communities to the nodes in the graph, then iteratively assign to each node the community most represented in its neighbors. .. [LLP] Paolo Boldi, Marco Rosa, Massimo Santini, Sebastiano Vigna. *Layered label propagation: a multiresolution coordinate-free ordering for compressing social networks.* WWW 2011: 587-596 DOI: https://doi.org/10.1145/1963405.1963488 preprint: https://arxiv.org/abs/1011.5425 LLP is more costly than simple BFS-based compression in both time and memory. Even though the algorithm has a linear time complexity, it does multiple iterations on the graph and is significantly slower than the BFS which is just one single traversal. Moreover, keeping track of the communities requires a total of 13 bytes per node, which increases the RAM requirements. Because of these constraints, it is unrealistic to run the LLP algorithm on the uncompressed version of the graph; this is why we do an intermediate compression with the BFS ordering first, then compress the entire graph *again* with an even better ordering. The LLP algorithm takes a simplified (loopless, symmetric) graph as an input, which we already computed in the previous steps. The algorithm is also parameterized by a list of γ values, a "resolution" parameter which defines the shapes of the clustering it produces: either small, but denser pieces, or larger, but unavoidably sparser pieces. The algorithm then combines the different clusterings together to generate the output reordering. γ values are given to the algorithm in the form :math:`\frac{j}{2^k}`; by default, 12 different values of γ are used. However, the combination procedure is very slow, and using that many γ values could take several months in our case. We thus narrowed down a smaller set of γ values that empirically give good compression results, which are used by default in the pipeline. In general, smaller values of γ seem to generate better compression ratios. The effect of a given γ is that the density of the sparsest cluster is at least γ γ+1, so large γ values imply small, more dense clusters. It is reasonable to assume that since the graph is very sparse to start with, such clusters are not that useful. The resulting ordering is stored in a ``graph-llp.order`` file. 9. PERMUTE_LLP -------------- Once the LLP order is computed, we permute the BFS-compressed graph using the this new ordering. The LLP-compressed graph, which is our final compressed graph, is stored in the files ``graph.{graph,offsets,properties}``. 10. OBL ------- Cache the BVGraph offsets of the forward graph to make loading faster. The resulting offset big list is stored in the ``graph.obl`` file. 11. COMPOSE_ORDERS ------------------ To be able to translate the initial MPH inputs to their resulting rank in the LLP-compressed graph, we need to use the two order permutations successively: the base → BFS permutation, then the BFS → LLP permutation. To make this less wasteful, we *compose* the two permutations into a single one. We use the `composePermutationsInPlace `_ function of the dsiutils library. The resulting permutation is stored as a ``graph.order`` file. Hashing a SWHID with the ``graph.mph`` function, then permuting the result using the ``graph.order`` permutation yields the integer node ID matching the input SWHID in the graph. 12. STATS --------- This step computes various statistics on the compressed graph: - ``.stats``: statistics such as number of nodes, edges, avg/min/max degree, average locality, etc. - ``.indegree``: graph indegree distribution - ``.outdegree``: graph outdegree distribution This step uses the `Stats `_ class from WebGraph. 13. TRANSPOSE ------------- Transpose the graph to allow backward traversal, using the `Transform `_ class from WebGraph. The resulting transposed graph is stored as the ``graph-transposed.{graph,offsets,properties}`` files. 14. TRANSPOSE_OBL ----------------- Same as OBL, but for the transposed graph. The resulting offset big list is stored in the ``graph-transposed.obl`` file. 15. MAPS -------- This steps generates the *node mappings* described in :ref:`swh-graph-java-node-mappings`. In particular, it generates: - ``graph.node2swhid.bin``: a compact binary representation of all the SWHIDs in the graph, ordered by their rank in the graph file. - ``graph.node2type.bin``: a `LongBigArrayBitVector `_ which stores the type of each node. It does so by reading all the SWHIDs in the ``graph.nodes.csv.zst`` file generated in the EXTRACT_NODES step, then getting their corresponding node IDs (using the ``.mph`` and ``.order`` files), then sorting all the SWHIDs according to their node ID. It then writes these SWHIDs in order, in a compact but seekable binary format, which can be used to return the SWHID corresponding to any given node in O(1). 16. EXTRACT_PERSONS ------------------- This step reads the ORC graph dataset and extracts all the unique persons it contains. Here, "persons" are defined as the set of unique pairs of name + email, potentially pseudonymized, found either as revision authors, revision committers or release authors. The ExtractPersons class reads all the persons from revision and release tables, then uses ``sort -u`` to get a sorted list without any duplicates. The resulting sorted list of authors is stored in the ``graph.persons.csv.zst`` file. 17. MPH_PERSONS --------------- This step computes a Minimal Perfect Hash function on the set of all the unique persons extracted in the EXTRACT_PERSONS step. Each individual person is mapped to a unique integer in :math:`[0, n-1]` where *n* is the total number of persons. The resulting function is serialized and stored in the ``graph.persons.mph`` file. 18. NODE_PROPERTIES ------------------- This step generates the *node property files*, as described in :ref:`swh-graph-java-node-properties`. The nodes in the Software Heritage Graph each have associated *properties* (e.g., commit timestamps, authors, messages, ...). The values of these properties for each node in the graph are compressed and stored in files alongside the compressed graph. The WriteNodeProperties class reads all the properties from the ORC Graph Dataset, then serializes each of them in a representation suitable for efficient random access (e.g., large binary arrays) and stores them on disk. For persons (authors, committers etc), the MPH computed in the MPH_PERSONS step is used to store them as a single pseudonymized integer ID, which uniquely represents a full name + email. The results are stored in the following list of files: - ``graph.property.author_id.bin`` - ``graph.property.author_timestamp.bin`` - ``graph.property.author_timestamp_offset.bin`` - ``graph.property.committer_id.bin`` - ``graph.property.committer_timestamp.bin`` - ``graph.property.committer_timestamp_offset.bin`` - ``graph.property.content.is_skipped.bin`` - ``graph.property.content.length.bin`` - ``graph.property.message.bin`` - ``graph.property.message.offset.bin`` - ``graph.property.tag_name.bin`` - ``graph.property.tag_name.offset.bin`` 19. MPH_LABELS -------------- This step computes a **monotone** Minimal Perfect Hash function on the set of all the unique *arc label names* extracted in the EXTRACT_NODES step. Each individual arc label name (i.e., directory entry names and snapshot branch names) is monotonely mapped to a unique integer in :math:`[0, n-1]`, where *n* is the total number of unique arc label names, which corresponds to their **lexical rank** in the set of all arc labels. In other words, this MPH being monotone means that the hash of the *k*-th item in the sorted input list of arc labels will always be *k*. We use the `LcpMonotoneMinimalPerfectHashFunction `_ of Sux4J to generate this function. The rationale for using a monotone function here is that it will allow us to quickly get back the arc label from its hash without having to store an additional permutation. The resulting MPH function is serialized and stored in the ``graph.labels.mph`` file. 20. FCL_LABELS -------------- This step computes a *reverse-mapping* for arc labels, i.e., a way to efficiently get the arc label name from its hash computed with the monotone MPH of the MPH_LABELS step. Thanks to the MPH being monotone, this boils down to storing all the labels in lexicographic order in a string list format that allows O(1) access to its elements. For this purpose, we use the `MappedFrontCodedStringBigList `_ class from the dsiutils library, using the ``graph.labels.csv.zst`` file as its input. It stores the label names in a compact way by using front-coding compression, which is particularly efficient here because the strings are already in lexicographic order. The resulting FCL files are stored as ``graph.labels.fcl.*``, and they can be loaded using memory mapping. 21. EDGE_LABELS --------------- This step generates the *edge property files*, as described in :ref:`swh-graph-java-edge-properties`. These files allow us to get the *edge labels* as we iterate on the edges of the graph. The files essentially contain compressed sorted triplets of the form (source, destination, label), with additional offsets to allow random access. To generate these files, the LabelMapBuilder class starts by reading in parallel the labelled edges in the ORC dataset, which can be thought of as quadruplets containing the source SWHID, the destination SWHID, the label name and the entry permission if applicable: .. code-block:: text swh:1:snp:4548a5… swh:1:rev:0d6834… cmVmcy9oZWFkcy9tYXN0ZXI= swh:1:dir:05faa1… swh:1:cnt:a35136… dGVzdC5j 33188 swh:1:dir:05faa1… swh:1:dir:d0ff82… dGVzdA== 16384 ... Using the ``graph.mph`` and the ``graph.order`` files, we hash and permute the source and destination nodes. We also monotonically hash the labels using the ``graph.labels.mph`` function to obtain the arc label identifiers. The permissions are normalized as one of the 6 possible values in the ``DirEntry.Permission.Type`` enum, and are then stored in the 3 lowest bits of the label field. .. code-block:: text 4421 14773 154 1877 21441 1134 1877 14143 1141 ... These hashed edges and their compact-form labels are then put in large batches sorted in an aggressively parallel fashion, which are then stored as ``.bitstream`` files. These batch files are put in a heap structure to perform a merge sort on the fly on all the batches. Then, the LabelMapBuilder loads the graph and starts iterating on its edges. It synchronizes the stream of edges read from the graph with the stream of sorted edges and labels read from the bitstreams in the heap. At this point, it writes the labels to the following output files: - ``graph-labelled.properties``: a property file describing the graph, notably containing the basename of the wrapped graph. - ``graph-labelled.labels``: the compressed labels - ``graph-labelled.labeloffsets``: the offsets used to access the labels in random order. It then does the same with backward edge batches to get the transposed equivalent of these files: ``graph-transposed-labelled.{properties,labels,labeloffsets}``. 23. EDGE_LABELS_OBL ------------------- Cache the label offsets of the forward labelled graph to make loading faster. The resulting label offset big list is stored in the ``graph-labelled.labelobl`` file. 23. EDGE_LABELS_TRANSPOSE_OBL ----------------------------- Same as EDGE_LABELS_OBL, but for the transposed labelled graph. The resulting label offset big list is stored in the ``graph-transposed-labelled.labelobl`` file. 24. CLEAN_TMP ------------- This step reclaims space by deleting the temporary directory, as well as all the intermediate outputs that are no longer necessary now that the final graph has been compressed (shown in gray in the step diagram).